doc: 📝 document environment variables

✨ add man page

.pre-commit-config.yaml

@@ -1,11 +0,0 @@
-repos:
-  - repo: https://github.com/syntaqx/git-hooks
-    rev: v0.0.17
-    hooks:
-    - id: shellcheck
-    - id: shfmt
-      args: 
-        - "-l" # list files whose formatting differs from shfmt's
-        - "-i 2" # indent: 0 for tabs (default), >0 for number of spaces
-        - "-ci" # switch cases will be indented
-        - "-w" # write result to file instead of stdout

CHANGELOG.md

@@ -1,23 +1,6 @@
 # Changelog
 
 
-## (unreleased)
-
-### Documentation
-
-* :memo: update README.md. [Eduard Veit]
-
-### Other
-
-* :recycle: normalizing pre-commit configuration to a top-level map. [Eduard Veit]
-
-* :recycle: refactorings. [Eduard Veit]
-
-* Feature: :sparkles: add pre-commit git hook for shellcheck. [Eduard Veit]
-
-* Refactor: :recycle: remove unused help message. [Eduard Veit]
-
-
 ## 0.1.2 (2021-04-23)
 
 ### Documentation

README.md

@@ -142,11 +142,11 @@ services:
 ```
 ## environment variables
 | variable              | default value   | description |
-| --------------------- | --------------- | --------------------------------------------- |
-| DYNB_DYN_DOMAIN       | undefined       | required; `dyndns.example.com`                |
-| DYNB_SERVICE_PROVIDER | undefined       | required; `deSEC`, `duckdns`, `dynv6`, `inwx` |
-| DYNB_UPDATE_METHOD    | undefined       | required; `dyndns` or `domrobot` (with inwx)  |
-| DYNB_IP_MODE          | undefined       | required; `4`, `6` or `64` for both           |
+| --------------------- | --------------- | ----------- |
+| DYNB_DYN_DOMAIN       | undefined       | required |
+| DYNB_SERVICE_PROVIDER | undefined       | required |
+| DYNB_UPDATE_METHOD    | undefined       | required |
+| DYNB_IP_MODE          | undefined       | required |
 | DYNB_USERNAME         | undefined       | the requirement depends on your provider and the update method |
 | DYNB_PASSWORD         | undefined       | the requirement depends on your provider and the update method |
 | DYNB_TOKEN            | undefined       | the requirement depends on your provider and the update method |
@@ -154,4 +154,4 @@ services:
 | DYNB_DEBUG            | undefined       | more console outputs |
 | DYNB_IPv4_CHECK_SITE  | api64.ipify.org | You need a website or Web-API that outputs your remote IP |
 | DYNB_IPv6_CHECK_SITE  | api64.ipify.org | You need a website or Web-API that outputs your remote IP |
-| DYNB_DNS_CHECK_SERVER | undefined       | If you are using a local DNS Resolver/Server make sure it answers with the public answer or set another server |
+| DYNB_DNS_CHECK_SERVER | 1.1.1.1         | If you are using a local DNS Resolver/Server make sure it answers with the public answer |

dynb-parsing-template.m4

@@ -1,24 +0,0 @@
-#!/bin/bash
-
-# m4_ignore(
-echo "This is just a script template for argbash, not the script." >&2
-exit 11  #)Created by argbash-init v2.10.0
-# Rearrange the order of options below according to what you would like to see in the help message.
-# ARG_OPTIONAL_BOOLEAN([version],[v],[outputs the client version],[off])
-# ARG_OPTIONAL_BOOLEAN([link],[l],[links to your script at ~/.local/bin/dynb],[off])
-# ARG_OPTIONAL_BOOLEAN([reset],[r],[deletes the client blocking status file],[off])
-# ARG_OPTIONAL_BOOLEAN([debug],[],[enables debug mode],[off])
-# ARG_OPTIONAL_SINGLE([update-method],[m],[choose if you want to use DynDNS2 or the DomRobot RPC-API],[])
-# ARG_OPTIONAL_SINGLE([ip-mode],[i],[updates type A (IPv4) and AAAA (IPv6) records],[])
-# ARG_OPTIONAL_SINGLE([domain],[d],[set the domain you want to update],[])
-# ARG_OPTIONAL_SINGLE([service-provider],[s],[set your provider in case you are using DynDNS2],[])
-# ARG_OPTIONAL_SINGLE([username],[u],[depends on your selected update method and your provider],[])
-# ARG_OPTIONAL_SINGLE([password],[p],[depends on your selected update method and your provider],[])
-# ARG_OPTIONAL_SINGLE([token],[t],[depends on your selected update method and your provider],[])
-# ARG_OPTIONAL_SINGLE([interval],[],[choose the seconds interval to run the script in a loop, minimum is 60],[])
-# ARG_HELP([DynB - dynamic DNS update script for bash])
-# ARGBASH_GO
-
-# [ <-- needed because of Argbash
-
-# ] <-- needed because of Argbash

dynb-parsing.sh

@@ -1,297 +0,0 @@
-#!/bin/bash
-
-# Created by argbash-init v2.10.0
-# Rearrange the order of options below according to what you would like to see in the help message.
-# ARG_OPTIONAL_BOOLEAN([version],[v],[outputs the client version],[off])
-# ARG_OPTIONAL_BOOLEAN([link],[l],[links to your script at ~/.local/bin/dynb],[off])
-# ARG_OPTIONAL_BOOLEAN([reset],[r],[deletes the client blocking status file],[off])
-# ARG_OPTIONAL_BOOLEAN([debug],[],[enables debug mode],[off])
-# ARG_OPTIONAL_SINGLE([update-method],[m],[choose if you want to use DynDNS2 or the DomRobot RPC-API],[])
-# ARG_OPTIONAL_SINGLE([ip-mode],[i],[updates type A (IPv4) and AAAA (IPv6) records],[])
-# ARG_OPTIONAL_SINGLE([domain],[d],[set the domain you want to update],[])
-# ARG_OPTIONAL_SINGLE([service-provider],[s],[set your provider in case you are using DynDNS2],[])
-# ARG_OPTIONAL_SINGLE([username],[u],[depends on your selected update method and your provider],[])
-# ARG_OPTIONAL_SINGLE([password],[p],[depends on your selected update method and your provider],[])
-# ARG_OPTIONAL_SINGLE([token],[t],[depends on your selected update method and your provider],[])
-# ARG_OPTIONAL_SINGLE([interval],[],[choose the seconds interval to run the script in a loop, minimum is 60],[])
-# ARG_HELP([DynB - dynamic DNS update script for bash])
-# ARGBASH_GO()
-# needed because of Argbash --> m4_ignore([
-### START OF CODE GENERATED BY Argbash v2.10.0 one line above ###
-# Argbash is a bash code generator used to get arguments parsing right.
-# Argbash is FREE SOFTWARE, see https://argbash.io for more info
-
-
-# # When called, the process ends.
-# Args:
-# 	$1: The exit message (print to stderr)
-# 	$2: The exit code (default is 1)
-# if env var _PRINT_HELP is set to 'yes', the usage is print to stderr (prior to $1)
-# Example:
-# 	test -f "$_arg_infile" || _PRINT_HELP=yes die "Can't continue, have to supply file as an argument, got '$_arg_infile'" 4
-die()
-{
-	local _ret="${2:-1}"
-	test "${_PRINT_HELP:-no}" = yes && print_help >&2
-	echo "$1" >&2
-	exit "${_ret}"
-}
-
-
-# Function that evaluates whether a value passed to it begins by a character
-# that is a short option of an argument the script knows about.
-# This is required in order to support getopts-like short options grouping.
-begins_with_short_option()
-{
-	local first_option all_short_options='vlrmidsupth'
-	first_option="${1:0:1}"
-	test "$all_short_options" = "${all_short_options/$first_option/}" && return 1 || return 0
-}
-
-# THE DEFAULTS INITIALIZATION - OPTIONALS
-_arg_version="off"
-_arg_link="off"
-_arg_reset="off"
-_arg_debug="off"
-_arg_update_method=
-_arg_ip_mode=
-_arg_domain=
-_arg_service_provider=
-_arg_username=
-_arg_password=
-_arg_token=
-_arg_interval=
-
-
-# Function that prints general usage of the script.
-# This is useful if users asks for it, or if there is an argument parsing error (unexpected / spurious arguments)
-# and it makes sense to remind the user how the script is supposed to be called.
-print_help()
-{
-	printf '%s\n' "DynB - dynamic DNS update script for bash"
-	printf 'Usage: %s [-v|--(no-)version] [-l|--(no-)link] [-r|--(no-)reset] [--(no-)debug] [-m|--update-method <arg>] [-i|--ip-mode <arg>] [-d|--domain <arg>] [-s|--service-provider <arg>] [-u|--username <arg>] [-p|--password <arg>] [-t|--token <arg>] [--interval <arg>] [-h|--help]\n' "$0"
-	printf '\t%s\n' "-v, --version, --no-version: outputs the client version (off by default)"
-	printf '\t%s\n' "-l, --link, --no-link: links to your script at ~/.local/bin/dynb (off by default)"
-	printf '\t%s\n' "-r, --reset, --no-reset: deletes the client blocking status file (off by default)"
-	printf '\t%s\n' "--debug, --no-debug: enables debug mode (off by default)"
-	printf '\t%s\n' "-m, --update-method: choose if you want to use DynDNS2 or the DomRobot RPC-API (no default)"
-	printf '\t%s\n' "-i, --ip-mode: updates type A (IPv4) and AAAA (IPv6) records (no default)"
-	printf '\t%s\n' "-d, --domain: set the domain you want to update (no default)"
-	printf '\t%s\n' "-s, --service-provider: set your provider in case you are using DynDNS2 (no default)"
-	printf '\t%s\n' "-u, --username: depends on your selected update method and your provider (no default)"
-	printf '\t%s\n' "-p, --password: depends on your selected update method and your provider (no default)"
-	printf '\t%s\n' "-t, --token: depends on your selected update method and your provider (no default)"
-	printf '\t%s\n' "--interval: choose the seconds interval to run the script in a loop, minimum is 60 (no default)"
-	printf '\t%s\n' "-h, --help: Prints help"
-}
-
-
-# The parsing of the command-line
-parse_commandline()
-{
-	while test $# -gt 0
-	do
-		_key="$1"
-		case "$_key" in
-			# The version argurment doesn't accept a value,
-			# we expect the --version or -v, so we watch for them.
-			-v|--no-version|--version)
-				_arg_version="on"
-				test "${1:0:5}" = "--no-" && _arg_version="off"
-				;;
-			# We support getopts-style short arguments clustering,
-			# so as -v doesn't accept value, other short options may be appended to it, so we watch for -v*.
-			# After stripping the leading -v from the argument, we have to make sure
-			# that the first character that follows coresponds to a short option.
-			-v*)
-				_arg_version="on"
-				_next="${_key##-v}"
-				if test -n "$_next" -a "$_next" != "$_key"
-				then
-					{ begins_with_short_option "$_next" && shift && set -- "-v" "-${_next}" "$@"; } || die "The short option '$_key' can't be decomposed to ${_key:0:2} and -${_key:2}, because ${_key:0:2} doesn't accept value and '-${_key:2:1}' doesn't correspond to a short option."
-				fi
-				;;
-			# See the comment of option '--version' to see what's going on here - principle is the same.
-			-l|--no-link|--link)
-				_arg_link="on"
-				test "${1:0:5}" = "--no-" && _arg_link="off"
-				;;
-			# See the comment of option '-v' to see what's going on here - principle is the same.
-			-l*)
-				_arg_link="on"
-				_next="${_key##-l}"
-				if test -n "$_next" -a "$_next" != "$_key"
-				then
-					{ begins_with_short_option "$_next" && shift && set -- "-l" "-${_next}" "$@"; } || die "The short option '$_key' can't be decomposed to ${_key:0:2} and -${_key:2}, because ${_key:0:2} doesn't accept value and '-${_key:2:1}' doesn't correspond to a short option."
-				fi
-				;;
-			# See the comment of option '--version' to see what's going on here - principle is the same.
-			-r|--no-reset|--reset)
-				_arg_reset="on"
-				test "${1:0:5}" = "--no-" && _arg_reset="off"
-				;;
-			# See the comment of option '-v' to see what's going on here - principle is the same.
-			-r*)
-				_arg_reset="on"
-				_next="${_key##-r}"
-				if test -n "$_next" -a "$_next" != "$_key"
-				then
-					{ begins_with_short_option "$_next" && shift && set -- "-r" "-${_next}" "$@"; } || die "The short option '$_key' can't be decomposed to ${_key:0:2} and -${_key:2}, because ${_key:0:2} doesn't accept value and '-${_key:2:1}' doesn't correspond to a short option."
-				fi
-				;;
-			# See the comment of option '--version' to see what's going on here - principle is the same.
-			--no-debug|--debug)
-				_arg_debug="on"
-				test "${1:0:5}" = "--no-" && _arg_debug="off"
-				;;
-			# We support whitespace as a delimiter between option argument and its value.
-			# Therefore, we expect the --update-method or -m value.
-			# so we watch for --update-method and -m.
-			# Since we know that we got the long or short option,
-			# we just reach out for the next argument to get the value.
-			-m|--update-method)
-				test $# -lt 2 && die "Missing value for the optional argument '$_key'." 1
-				_arg_update_method="$2"
-				shift
-				;;
-			# We support the = as a delimiter between option argument and its value.
-			# Therefore, we expect --update-method=value, so we watch for --update-method=*
-			# For whatever we get, we strip '--update-method=' using the ${var##--update-method=} notation
-			# to get the argument value
-			--update-method=*)
-				_arg_update_method="${_key##--update-method=}"
-				;;
-			# We support getopts-style short arguments grouping,
-			# so as -m accepts value, we allow it to be appended to it, so we watch for -m*
-			# and we strip the leading -m from the argument string using the ${var##-m} notation.
-			-m*)
-				_arg_update_method="${_key##-m}"
-				;;
-			# See the comment of option '--update-method' to see what's going on here - principle is the same.
-			-i|--ip-mode)
-				test $# -lt 2 && die "Missing value for the optional argument '$_key'." 1
-				_arg_ip_mode="$2"
-				shift
-				;;
-			# See the comment of option '--update-method=' to see what's going on here - principle is the same.
-			--ip-mode=*)
-				_arg_ip_mode="${_key##--ip-mode=}"
-				;;
-			# See the comment of option '-m' to see what's going on here - principle is the same.
-			-i*)
-				_arg_ip_mode="${_key##-i}"
-				;;
-			# See the comment of option '--update-method' to see what's going on here - principle is the same.
-			-d|--domain)
-				test $# -lt 2 && die "Missing value for the optional argument '$_key'." 1
-				_arg_domain="$2"
-				shift
-				;;
-			# See the comment of option '--update-method=' to see what's going on here - principle is the same.
-			--domain=*)
-				_arg_domain="${_key##--domain=}"
-				;;
-			# See the comment of option '-m' to see what's going on here - principle is the same.
-			-d*)
-				_arg_domain="${_key##-d}"
-				;;
-			# See the comment of option '--update-method' to see what's going on here - principle is the same.
-			-s|--service-provider)
-				test $# -lt 2 && die "Missing value for the optional argument '$_key'." 1
-				_arg_service_provider="$2"
-				shift
-				;;
-			# See the comment of option '--update-method=' to see what's going on here - principle is the same.
-			--service-provider=*)
-				_arg_service_provider="${_key##--service-provider=}"
-				;;
-			# See the comment of option '-m' to see what's going on here - principle is the same.
-			-s*)
-				_arg_service_provider="${_key##-s}"
-				;;
-			# See the comment of option '--update-method' to see what's going on here - principle is the same.
-			-u|--username)
-				test $# -lt 2 && die "Missing value for the optional argument '$_key'." 1
-				_arg_username="$2"
-				shift
-				;;
-			# See the comment of option '--update-method=' to see what's going on here - principle is the same.
-			--username=*)
-				_arg_username="${_key##--username=}"
-				;;
-			# See the comment of option '-m' to see what's going on here - principle is the same.
-			-u*)
-				_arg_username="${_key##-u}"
-				;;
-			# See the comment of option '--update-method' to see what's going on here - principle is the same.
-			-p|--password)
-				test $# -lt 2 && die "Missing value for the optional argument '$_key'." 1
-				_arg_password="$2"
-				shift
-				;;
-			# See the comment of option '--update-method=' to see what's going on here - principle is the same.
-			--password=*)
-				_arg_password="${_key##--password=}"
-				;;
-			# See the comment of option '-m' to see what's going on here - principle is the same.
-			-p*)
-				_arg_password="${_key##-p}"
-				;;
-			# See the comment of option '--update-method' to see what's going on here - principle is the same.
-			-t|--token)
-				test $# -lt 2 && die "Missing value for the optional argument '$_key'." 1
-				_arg_token="$2"
-				shift
-				;;
-			# See the comment of option '--update-method=' to see what's going on here - principle is the same.
-			--token=*)
-				_arg_token="${_key##--token=}"
-				;;
-			# See the comment of option '-m' to see what's going on here - principle is the same.
-			-t*)
-				_arg_token="${_key##-t}"
-				;;
-			# See the comment of option '--update-method' to see what's going on here - principle is the same.
-			--interval)
-				test $# -lt 2 && die "Missing value for the optional argument '$_key'." 1
-				_arg_interval="$2"
-				shift
-				;;
-			# See the comment of option '--update-method=' to see what's going on here - principle is the same.
-			--interval=*)
-				_arg_interval="${_key##--interval=}"
-				;;
-			# See the comment of option '--version' to see what's going on here - principle is the same.
-			-h|--help)
-				print_help
-				exit 0
-				;;
-			# See the comment of option '-v' to see what's going on here - principle is the same.
-			-h*)
-				print_help
-				exit 0
-				;;
-			*)
-				_PRINT_HELP=yes die "FATAL ERROR: Got an unexpected argument '$1'" 1
-				;;
-		esac
-		shift
-	done
-}
-
-# Now call all the functions defined above that are needed to get the job done
-parse_commandline "$@"
-
-# OTHER STUFF GENERATED BY Argbash
-
-### END OF CODE GENERATED BY Argbash (sortof) ### ])
-# [ <-- needed because of Argbash
-
-
-# vvv  PLACE YOUR CODE HERE  vvv
-
-# PUT YOUR CODE HERE
-
-# ^^^  TERMINATE YOUR CODE BEFORE THE BOTTOM ARGBASH MARKER  ^^^
-
-# ] <-- needed because of Argbash

dynb.sh

@@ -41,7 +41,7 @@ _ipv4_checker=api64.ipify.org
 _ipv6_checker=api64.ipify.org
 
 ## An exernal DNS check server prevents wrong info from local DNS servers/resolvers
-_DNS_checkServer=
+_DNS_checkServer=1.1.1.1
 
 ## if you are actively using multiple network interfaces you might want to specify this
 ## normally the default value is okay
@@ -73,6 +73,262 @@ _debug=0
 _minimum_looptime=60
 _loopMode=0
 
+# Created by argbash-init v2.10.0
+# Rearrange the order of options below according to what you would like to see in the help message.
+# ARG_OPTIONAL_BOOLEAN([version],[v],[outputs the client version],[off])
+# ARG_OPTIONAL_BOOLEAN([link],[l],[links to your script at ~/.local/bin/dynb],[off])
+# ARG_OPTIONAL_BOOLEAN([reset],[r],[deletes the client blocking status file],[off])
+# ARG_OPTIONAL_BOOLEAN([debug],[],[enables debug mode],[off])
+# ARG_OPTIONAL_SINGLE([update-method],[m],[choose if you want to use DynDNS2 or the DomRobot RPC-API],[])
+# ARG_OPTIONAL_SINGLE([ip-mode],[i],[updates type A (IPv4) and AAAA (IPv6) records],[])
+# ARG_OPTIONAL_SINGLE([domain],[d],[set the domain you want to update],[])
+# ARG_OPTIONAL_SINGLE([service-provider],[s],[set your provider in case you are using DynDNS2],[])
+# ARG_OPTIONAL_SINGLE([username],[u],[depends on your selected update method and your provider],[])
+# ARG_OPTIONAL_SINGLE([password],[p],[depends on your selected update method and your provider],[])
+# ARG_OPTIONAL_SINGLE([token],[t],[depends on your selected update method and your provider],[])
+# ARG_OPTIONAL_SINGLE([interval],[],[choose the seconds interval to run the script in a loop, minimum is 60],[])
+# ARG_HELP([DynB - dynamic DNS update script for bash])
+# ARGBASH_GO()
+# needed because of Argbash --> m4_ignore([
+### START OF CODE GENERATED BY Argbash v2.10.0 one line above ###
+# Argbash is a bash code generator used to get arguments parsing right.
+# Argbash is FREE SOFTWARE, see https://argbash.io for more info
+
+
+die()
+{
+	local _ret="${2:-1}"
+	test "${_PRINT_HELP:-no}" = yes && print_help >&2
+	echo "$1" >&2
+	exit "${_ret}"
+}
+
+
+begins_with_short_option()
+{
+	local first_option all_short_options='vlrmidsupth'
+	first_option="${1:0:1}"
+	test "$all_short_options" = "${all_short_options/$first_option/}" && return 1 || return 0
+}
+
+# THE DEFAULTS INITIALIZATION - OPTIONALS
+_arg_version="off"
+_arg_link="off"
+_arg_reset="off"
+_arg_debug="off"
+_arg_update_method=
+_arg_ip_mode=
+_arg_domain=
+_arg_service_provider=
+_arg_username=
+_arg_password=
+_arg_token=
+_arg_interval=
+
+
+print_help()
+{
+	printf '%s\n' "DynB - dynamic DNS update script for bash"
+	printf 'Usage: %s [-v|--(no-)version] [-l|--(no-)link] [-r|--(no-)reset] [--(no-)debug] [-m|--update-method <arg>] [-i|--ip-mode <arg>] [-d|--domain <arg>] [-s|--service-provider <arg>] [-u|--username <arg>] [-p|--password <arg>] [-t|--token <arg>] [--interval <arg>] [-h|--help]\n' "$0"
+	printf '\t%s\n' "-v, --version, --no-version: outputs the client version (off by default)"
+	printf '\t%s\n' "-l, --link, --no-link: links to your script at ~/.local/bin/dynb (off by default)"
+	printf '\t%s\n' "-r, --reset, --no-reset: deletes the client blocking status file (off by default)"
+	printf '\t%s\n' "--debug, --no-debug: enables debug mode (off by default)"
+	printf '\t%s\n' "-m, --update-method: choose if you want to use DynDNS2 or the DomRobot RPC-API (no default)"
+	printf '\t%s\n' "-i, --ip-mode: updates type A (IPv4) and AAAA (IPv6) records (no default)"
+	printf '\t%s\n' "-d, --domain: set the domain you want to update (no default)"
+	printf '\t%s\n' "-s, --service-provider: set your provider in case you are using DynDNS2 (no default)"
+	printf '\t%s\n' "-u, --username: depends on your selected update method and your provider (no default)"
+	printf '\t%s\n' "-p, --password: depends on your selected update method and your provider (no default)"
+	printf '\t%s\n' "-t, --token: depends on your selected update method and your provider (no default)"
+	printf '\t%s\n' "--interval: choose the seconds interval to run the script in a loop, minimum is 60 (no default)"
+	printf '\t%s\n' "-h, --help: Prints help"
+}
+
+
+parse_commandline()
+{
+	while test $# -gt 0
+	do
+		_key="$1"
+		case "$_key" in
+			-v|--no-version|--version)
+				_arg_version="on"
+				test "${1:0:5}" = "--no-" && _arg_version="off"
+				;;
+			-v*)
+				_arg_version="on"
+				_next="${_key##-v}"
+				if test -n "$_next" -a "$_next" != "$_key"
+				then
+					{ begins_with_short_option "$_next" && shift && set -- "-v" "-${_next}" "$@"; } || die "The short option '$_key' can't be decomposed to ${_key:0:2} and -${_key:2}, because ${_key:0:2} doesn't accept value and '-${_key:2:1}' doesn't correspond to a short option."
+				fi
+				;;
+			-l|--no-link|--link)
+				_arg_link="on"
+				test "${1:0:5}" = "--no-" && _arg_link="off"
+				;;
+			-l*)
+				_arg_link="on"
+				_next="${_key##-l}"
+				if test -n "$_next" -a "$_next" != "$_key"
+				then
+					{ begins_with_short_option "$_next" && shift && set -- "-l" "-${_next}" "$@"; } || die "The short option '$_key' can't be decomposed to ${_key:0:2} and -${_key:2}, because ${_key:0:2} doesn't accept value and '-${_key:2:1}' doesn't correspond to a short option."
+				fi
+				;;
+			-r|--no-reset|--reset)
+				_arg_reset="on"
+				test "${1:0:5}" = "--no-" && _arg_reset="off"
+				;;
+			-r*)
+				_arg_reset="on"
+				_next="${_key##-r}"
+				if test -n "$_next" -a "$_next" != "$_key"
+				then
+					{ begins_with_short_option "$_next" && shift && set -- "-r" "-${_next}" "$@"; } || die "The short option '$_key' can't be decomposed to ${_key:0:2} and -${_key:2}, because ${_key:0:2} doesn't accept value and '-${_key:2:1}' doesn't correspond to a short option."
+				fi
+				;;
+			--no-debug|--debug)
+				_arg_debug="on"
+				test "${1:0:5}" = "--no-" && _arg_debug="off"
+				;;
+			-m|--update-method)
+				test $# -lt 2 && die "Missing value for the optional argument '$_key'." 1
+				_arg_update_method="$2"
+				shift
+				;;
+			--update-method=*)
+				_arg_update_method="${_key##--update-method=}"
+				;;
+			-m*)
+				_arg_update_method="${_key##-m}"
+				;;
+			-i|--ip-mode)
+				test $# -lt 2 && die "Missing value for the optional argument '$_key'." 1
+				_arg_ip_mode="$2"
+				shift
+				;;
+			--ip-mode=*)
+				_arg_ip_mode="${_key##--ip-mode=}"
+				;;
+			-i*)
+				_arg_ip_mode="${_key##-i}"
+				;;
+			-d|--domain)
+				test $# -lt 2 && die "Missing value for the optional argument '$_key'." 1
+				_arg_domain="$2"
+				shift
+				;;
+			--domain=*)
+				_arg_domain="${_key##--domain=}"
+				;;
+			-d*)
+				_arg_domain="${_key##-d}"
+				;;
+			-s|--service-provider)
+				test $# -lt 2 && die "Missing value for the optional argument '$_key'." 1
+				_arg_service_provider="$2"
+				shift
+				;;
+			--service-provider=*)
+				_arg_service_provider="${_key##--service-provider=}"
+				;;
+			-s*)
+				_arg_service_provider="${_key##-s}"
+				;;
+			-u|--username)
+				test $# -lt 2 && die "Missing value for the optional argument '$_key'." 1
+				_arg_username="$2"
+				shift
+				;;
+			--username=*)
+				_arg_username="${_key##--username=}"
+				;;
+			-u*)
+				_arg_username="${_key##-u}"
+				;;
+			-p|--password)
+				test $# -lt 2 && die "Missing value for the optional argument '$_key'." 1
+				_arg_password="$2"
+				shift
+				;;
+			--password=*)
+				_arg_password="${_key##--password=}"
+				;;
+			-p*)
+				_arg_password="${_key##-p}"
+				;;
+			-t|--token)
+				test $# -lt 2 && die "Missing value for the optional argument '$_key'." 1
+				_arg_token="$2"
+				shift
+				;;
+			--token=*)
+				_arg_token="${_key##--token=}"
+				;;
+			-t*)
+				_arg_token="${_key##-t}"
+				;;
+			--interval)
+				test $# -lt 2 && die "Missing value for the optional argument '$_key'." 1
+				_arg_interval="$2"
+				shift
+				;;
+			--interval=*)
+				_arg_interval="${_key##--interval=}"
+				;;
+			-h|--help)
+				print_help
+				exit 0
+				;;
+			-h*)
+				print_help
+				exit 0
+				;;
+			*)
+				_PRINT_HELP=yes die "FATAL ERROR: Got an unexpected argument '$1'" 1
+				;;
+		esac
+		shift
+	done
+}
+
+parse_commandline "$@"
+
+# OTHER STUFF GENERATED BY Argbash
+
+### END OF CODE GENERATED BY Argbash (sortof) ### ])
+# [ <-- needed because of Argbash
+
+# The generated argbash help message does not look as nice as this:
+_help_message="$(cat << 'EOF'
+dynb - dynamic DNS update script for bash
+
+Usage
+=====
+dynb [options]
+
+-h, --help                                displays this help message
+--version                                 outputs the client version
+--link                                    links to your script at ~/.local/bin/dynb
+--reset                                   deletes the client blocking status file
+
+Configuration options
+---------------------
+-i | --ip-mode [ 4 | 6 | dual ]           updates type A (IPv4) and AAAA (IPv6) records
+-m | --update-method [dyndns | domrobot]  choose if you want to use DynDNS2 or the DomRobot RPC-API
+-s | --service-provider inwx              set your provider in case you are using DynDNS2
+-d | --domain "dyndns.example.com"        set the domain you want to update
+-u | --username "user42"                  depends on your selected update method and your provider
+-p | --password "SuperSecretPassword"     depends on your selected update method and your provider
+-t | --token "YourProviderGivenToken"     depends on your selected update method and your provider
+
+##### examples #####
+dynb --ip-mode dual --update-method domrobot --domain dyndns.example.com --username user42 --password SuperSecretPassword
+dynb --ip-mode dual --update-method dyndns --service-provider inwx --domain dyndns.example.com --username user42 --password SuperSecretPassword
+EOF
+)"
+
 function loopMode() {
   if [[ $_loopMode -eq 1 ]]; then
     return 0
@@ -108,36 +364,32 @@ function logtime() {
 
 # The main domain as an identifier for the dns zone is required for the updateRecord call
 function getMainDomain() {
-  request=$(
-    echo "{}" |
-      jq '(.method="nameserver.list")' |
-      jq "(.params.user=\"$DYNB_USERNAME\")" |
+  request=$( echo "{}" | \
+      jq '(.method="nameserver.list")' | \
+      jq "(.params.user=\"$DYNB_USERNAME\")" | \
       jq "(.params.pass=\"$DYNB_PASSWORD\")"
     )
 
-  _response=$(
-    curl --silent \
+  _response=$(curl --silent  \
       "$_interface_str" \
       --user-agent "$_userAgent" \
       --header "Content-Type: application/json" \
       --request POST $_INWX_JSON_API_URL \
       --data "$request" | jq ".resData.domains[] | select(inside(.domain=\"$DYNB_DYN_DOMAIN\"))"
     )
-  _main_domain=$(echo "$_response" | jq --raw-output '.domain')
+  _main_domain=$( echo "$_response" | jq --raw-output '.domain'  )
 }
 
 function fetchDNSRecords() {
-  request=$(
-    echo "{}" |
-      jq '(.method="'nameserver.info'")' |
-      jq "(.params.user=\"$DYNB_USERNAME\")" |
-      jq "(.params.pass=\"$DYNB_PASSWORD\")" |
-      jq "(.params.domain=\"$_main_domain\")" |
+  request=$( echo "{}" | \
+      jq '(.method="'nameserver.info'")' | \
+      jq "(.params.user=\"$DYNB_USERNAME\")" | \
+      jq "(.params.pass=\"$DYNB_PASSWORD\")" | \
+      jq "(.params.domain=\"$_main_domain\")" | \
       jq "(.params.name=\"$DYNB_DYN_DOMAIN\")"
     )
 
-  _response=$(
-    curl --silent \
+  _response=$( curl --silent  \
       "$_interface_str" \
       --user-agent "$_userAgent" \
       --header "Content-Type: application/json" \
@@ -145,7 +397,7 @@ function fetchDNSRecords() {
       --data "$request"
     )
 
-  _dns_records=$(echo "$_response" | jq '.resData.record[]')
+  _dns_records=$( echo "$_response" | jq '.resData.record[]' )
 }
 
 # requires parameter A or AAAA
@@ -165,18 +417,8 @@ function getDNSIP() {
 # 2. param: IP check server address
 # result to stdout
 function getRemoteIP() {
-  if [[ -n $_DNS_checkServer ]]; then
   curl --silent "$_interface_str" --user-agent "$_userAgent" \
-      --ipv"${1}" --dns-servers "$_DNS_checkServer" --location "${2}"
-  else
-    curl --silent "$_interface_str" --user-agent "$_userAgent" \
-      --ipv"${1}" --location "${2}"
-  fi
-  # shellcheck disable=2181
-  if [[ $? -gt 0 ]]; then
-    errorMessage "IPCheck (getRemoteIP ${1}) request failed"
-    exit 1
-  fi
+    --ipv"${1}" --dns-servers 1.1.1.1 --location "${2}"
 }
 
 # requires parameter
@@ -191,18 +433,16 @@ function updateRecord() {
     IP=$_new_IPv6
   fi
   if [[ $IP != "" ]]; then
-    request=$(
-      echo "{}" |
-        jq '(.method="nameserver.updateRecord")' |
-        jq "(.params.user=\"$DYNB_USERNAME\")" |
-        jq "(.params.pass=\"$DYNB_PASSWORD\")" |
-        jq "(.params.id=\"$ID\")" |
-        jq "(.params.content=\"$IP\")" |
+  request=$( echo "{}" | \
+      jq '(.method="nameserver.updateRecord")' | \
+      jq "(.params.user=\"$DYNB_USERNAME\")" | \
+      jq "(.params.pass=\"$DYNB_PASSWORD\")" | \
+      jq "(.params.id=\"$ID\")" | \
+      jq "(.params.content=\"$IP\")" | \
       jq "(.params.ttl=\"$TTL\")"
     )
 
-    _response=$(
-      curl --silent \
+  _response=$(curl --silent  \
       "$_interface_str" \
       --user-agent "$_userAgent" \
       --header "Content-Type: application/json" \
@@ -225,23 +465,23 @@ function dynupdate() {
   DYNV6_DYNDNS_UPDATE_URL="https://dynv6.com/api/update?zone=$DYNB_DYN_DOMAIN&token=$DYNB_TOKEN&"
 
   case $DYNB_SERVICE_PROVIDER in
-    inwx* | INWX*)
+    inwx* | INWX* )
       dyndns_update_url=$INWX_DYNDNS_UPDATE_URL
     ;;
-    deSEC* | desec* | dedyn*)
+    deSEC* | desec* | dedyn* )
       dyndns_update_url="${DESEC_DYNDNS_UPDATE_URL}"
     ;;
-    dynv6*)
+    dynv6* )
       dyndns_update_url="${DYNV6_DYNDNS_UPDATE_URL}"
       myip_str=ipv4
       myipv6_str=ipv6
     ;;
-    DuckDNS* | duckdns*)
+    DuckDNS* | duckdns* )
       dyndns_update_url="${DUCKDNS_DYNDNS_UPDATE_URL}"
       myip_str=ipv4
       myipv6_str=ipv6
     ;;
-    *)
+    * )
     errorMessage "$DYNB_SERVICE_PROVIDER is not supported"
     exit 1
     ;;
@@ -261,22 +501,21 @@ function dynupdate() {
 
   ## request ##
   case $DYNB_SERVICE_PROVIDER in
-    inwx* | INWX*)
+    inwx* | INWX* )
       _response=$(curl --silent "$_interface_str" \
       --user-agent "$_userAgent" \
       --user "$DYNB_USERNAME":"$DYNB_PASSWORD" \
-        "${dyndns_update_url}")
+      "${dyndns_update_url}" )
     ;;
-    deSEC* | desec* | dedyn*)
+    deSEC* | desec* | dedyn* )
       _response=$(curl --silent "$_interface_str" \
       --user-agent "$_userAgent" \
       --header "Authorization: Token $DYNB_TOKEN" \
       --get --data-urlencode "hostname=$DYNB_DYN_DOMAIN" \
-        "${dyndns_update_url}")
+      "${dyndns_update_url}" )
     ;;
-    dynv6* | duckDNS* | duckdns*)
-      _response=$(
-        curl --silent "$_interface_str" \
+    dynv6* | duckDNS* | duckdns* )
+      _response=$(curl --silent "$_interface_str" \
         --user-agent "$_userAgent" \
         "${dyndns_update_url}"
       )
@@ -284,7 +523,7 @@ function dynupdate() {
   esac
 
   case $_response in
-    good* | OK* | "addresses updated")
+    good* | OK* | "addresses updated" )
       if [[ $_response == "good 127.0.0.1" ]]; then
         errorMessage "$_response: Request ignored."
         return 1
@@ -294,51 +533,51 @@ function dynupdate() {
         return 0
       fi
     ;;
-    nochg*)
+    nochg* )
       infoMessage "$_response: Nothing has changed, IP addresses are still up to date."
       return 1
     ;;
-    abuse)
+    abuse )
       errorMessage "$_response: Username is blocked due to abuse."
       return 1
     ;;
-    badauth | 401)
+    badauth | 401 )
       errorMessage "$_response: Invalid username password combination."
       return 1
     ;;
-    badagent)
+    badagent )
       errorMessage "$_response: Client disabled. Something is very wrong!"
       return 1
     ;;
-    !donator)
+    !donator )
       errorMessage "$_response: An update request was sent, including a feature that is not available to that particular user such as offline options."
       return 1
     ;;
-    !yours)
+    !yours )
       errorMessage "$_response: The domain does not belong to your user account"
       return 1
     ;;
-    notfqdn)
+    notfqdn )
       errorMessage "$_response: Hostname $DYNB_DYN_DOMAIN is invalid"
       return 1
     ;;
-    nohost)
+    nohost )
       errorMessage "$_response: Hostname supplied does not exist under specified account, enter new login credentials before performing an additional request."
       return 1
     ;;
-    numhost)
+    numhost )
       errorMessage "$_response: Too many hostnames have been specified for this update"
       return 1
     ;;
-    dnserr)
+    dnserr )
       errorMessage "$_response: There is an internal error in the dyndns update system. Retry update no sooner than 30 minutes."
       return 1
     ;;
-    911 | 5*)
+    911 | 5* )
       errorMessage "$_response: A fatal error on provider side such as a database outage. Retry update no sooner than 30 minutes."
       return 1
     ;;
-    *)
+    * )
       if [[ "$_response" == "$_status" ]]; then
         errorMessage "An unknown response code has been received. $_response"
         return 1
@@ -351,21 +590,21 @@ function dynupdate() {
 }
 
 function setStatus() {
-  echo "_status=$1; _eventTime=$2; _errorCounter=$3; _statusHostname=$4; _statusUsername=$5; _statusPassword=$6" >/tmp/dynb.status
+  echo "_status=$1; _eventTime=$2; _errorCounter=$3; _statusHostname=$4; _statusUsername=$5; _statusPassword=$6" > /tmp/dynb.status
 }
 
 # handle errors from past update requests
 function checkStatus() {
   case $_status in
-    nochg*)
+    nochg* )
       if [[ _errorCounter -gt 1 ]]; then
         errorMessage "The update client was spamming unnecessary update requests, something might be wrong with your IP-Check site."
         errorMessage "Fix your config an then delete $_statusFile or restart your docker container"
         return 1
       fi
     ;;
-    nohost | !yours)
-      if [[ "$_statusHostname" == "$DYNB_DYN_DOMAIN" && ("$_statusUsername" == "$DYNB_USERNAME" || $_statusUsername == "$DYNB_TOKEN") ]]; then
+    nohost | !yours )
+      if [[ "$_statusHostname" == "$DYNB_DYN_DOMAIN" && ( "$_statusUsername" == "$DYNB_USERNAME" || $_statusUsername == "$DYNB_TOKEN" ) ]]; then
         errorMessage "Hostname supplied does not exist under specified account, enter new login credentials before performing an additional request."
         return 1
       else
@@ -373,7 +612,7 @@ function checkStatus() {
       fi
       return 0
     ;;
-    badauth | 401)
+    badauth | 401 )
       if [[ "$_statusUsername" == "$DYNB_USERNAME" && "$_statusPassword" == "$DYNB_PASSWORD" ]]; then
         errorMessage "Invalid username password combination."
         return 1
@@ -382,26 +621,26 @@ function checkStatus() {
       fi
       return 0
     ;;
-    badagent)
+    badagent )
       errorMessage "Client is deactivated by provider."
       echo "Fix your config and then manually remove $_statusFile to reset the client blockade."
       echo "If it still fails file an issue at github or try another client :)"
       return 1
     ;;
-    !donator)
+    !donator )
       errorMessage "An update request was sent, including a feature that is not available to that particular user such as offline options."
       echo "Fix your config and then manually remove $_statusFile to reset the client blockade"
       echo "If it still fails file an issue at github or try another client :)"
       return 1
     ;;
-    abuse)
+    abuse )
       errorMessage "Username is blocked due to abuse."
       echo "Fix your config and then manually remove $_statusFile to reset the client blockade"
       echo "If it still fails file an issue at github or try another client :)"
       return 1
     ;;
-    911 | 5*)
-      delta=$(($(date +%s) - _eventTime))
+    911 | 5* )
+      delta=$(( $(date +%s) - _eventTime ))
       if [[ $delta -lt 1800 ]]; then
         errorMessage "$_status: The provider currently has an fatal error. DynB will wait for next update until 30 minutes have passed since last request, $(date --date=@$delta -u +%M) minutes already passed."
         return 1
@@ -410,7 +649,7 @@ function checkStatus() {
       fi
       return 0
     ;;
-    *)
+    * )
       if [[ _errorCounter -gt 1 ]]; then
         errorMessage "An unknown response code has repeatedly been received. $_response"
         return 1
@@ -424,48 +663,52 @@ function checkStatus() {
 # requires parameter
 # 1. param: 4 or 6 for IP version
 function ipHasChanged() {
-  case ${1} in
-    4)
+  if [[ ${1} == 4 ]]; then
     remote_ip=$(getRemoteIP 4 $_ipv4_checker)
+    #TODO: this is duplicated code, refactor this.
+    if [[ $? -gt 0 ]]; then
+      errorMessage "IPCheck (getRemoteIP 4) request failed $remote_ip"
+      return 0
+    fi
     if [[ $DYNB_UPDATE_METHOD == domrobot ]]; then
       dns_ip=$(getDNSIP A)
     else
-        if [[ -n $_DNS_checkServer ]]; then
-          dig_response=$(dig @"${_DNS_checkServer}" in a +short "$DYNB_DYN_DOMAIN")
-        else
-          dig_response=$(dig in a +short "$DYNB_DYN_DOMAIN")
-        fi
+      dig_response=$(dig @${_DNS_checkServer} in a +short "$DYNB_DYN_DOMAIN")
+      #TODO: this is duplicated code, refactor this.
       if [[ $dig_response == ";; connection timed out; no servers could be reached" ]]; then
         errorMessage "DNS request failed $dig_response"
         return 0
       fi
       dns_ip=$dig_response
     fi
-      _new_IPv4=$remote_ip
-      debugMessage "New IPv4: $_new_IPv4 old was: $dns_ip"
-      ;;
-    6)
+  fi
+  if [[ ${1} == 6 ]]; then
     remote_ip=$(getRemoteIP 6 $_ipv6_checker)
+    #TODO: this is duplicated code, refactor this.
+    if [[ $? -gt 0 ]]; then
+      errorMessage "IPCheck (getRemoteIP 6) request failed $remote_ip"
+      return 0
+    fi
     if [[ $DYNB_UPDATE_METHOD == domrobot ]]; then
       dns_ip=$(getDNSIP AAAA)
     else
-        if [[ -n $_DNS_checkServer ]]; then
-          dig_response=$(dig @"${_DNS_checkServer}" in aaaa +short "$DYNB_DYN_DOMAIN")
-        else
-          dig_response=$(dig in aaaa +short "$DYNB_DYN_DOMAIN")
-        fi
+      dig_response=$(dig @${_DNS_checkServer} in aaaa +short "$DYNB_DYN_DOMAIN")
+      #TODO: this is duplicated code, refactor this.
       if [[ $dig_response == ";; connection timed out; no servers could be reached" ]]; then
         errorMessage "DNS request failed $dig_response"
         return 0
       fi
       dns_ip=$dig_response
     fi
+  fi
+
+  if [[ ${1} == 4 ]]; then
+    _new_IPv4=$remote_ip
+    debugMessage "New IPv4: $_new_IPv4 old was: $dns_ip"
+  else
     _new_IPv6=$remote_ip
     debugMessage "New IPv6: $_new_IPv6 old was: $dns_ip"
-      ;;
-    *) ;;
-
-  esac
+  fi
 
   if [[ "$remote_ip" == "$dns_ip" ]]; then
     return 0
@@ -479,54 +722,42 @@ function ipHasChanged() {
 ################
 
 function handleParameters() {
-  # shellcheck disable=SC2154
   if [[ $_arg_version == "on" ]]; then
     echo $_version
     exit 0
   fi
-  # shellcheck disable=SC2154
   if [[ $_arg_link == "on" ]]; then
     ln --verbose --symbolic "$(realpath "$0")" "$HOME/.local/bin/dynb"
     exit 0
   fi
-  # shellcheck disable=SC2154
   if [[ $_arg_reset == "on" ]]; then
     rm --verbose "$_statusFile"
     exit 0
   fi
-  # shellcheck disable=SC2154
     if [[ $_arg_debug == "on" ]]; then
     _debug=1
   fi
-  # shellcheck disable=SC2154
   if [[ $_arg_update_method != "" ]]; then
     DYNB_UPDATE_METHOD=$_arg_update_method
   fi
-  # shellcheck disable=SC2154
   if [[ $_arg_ip_mode != "" ]]; then
     DYNB_IP_MODE=$_arg_ip_mode
   fi
-  # shellcheck disable=SC2154
   if [[ $_arg_domain != "" ]]; then
     DYNB_DYN_DOMAIN=$_arg_domain
   fi
-  # shellcheck disable=SC2154
   if [[ $_arg_service_provider != "" ]]; then
     DYNB_SERVICE_PROVIDER=$_arg_service_provider
   fi
-  # shellcheck disable=SC2154
   if [[ $_arg_username != "" ]]; then
     DYNB_USERNAME=$_arg_username
   fi
-  # shellcheck disable=SC2154
   if [[ $_arg_password != "" ]]; then
     DYNB_PASSWORD=$_arg_password
   fi
-  # shellcheck disable=SC2154
   if [[ $_arg_token != "" ]]; then
     DYNB_TOKEN=$_arg_token
   fi
-  # shellcheck disable=SC2154
   if [[ $_arg_interval != "" ]]; then
     DYNB_INTERVAL=$_arg_interval
   fi
@@ -557,11 +788,9 @@ function handleParameters() {
   if [[ $DYNB_DEBUG == true ]]; then
     _debug=1
   fi
-  # shellcheck disable=SC2154
   if [[ -n $DYNB_IPv4_CHECK_SITE ]]; then
     _ipv4_checker=$DYNB_IPv4_CHECK_SITE
   fi
-  # shellcheck disable=SC2154
   if [[ -n $DYNB_IPv6_CHECK_SITE ]]; then
     _ipv6_checker=$DYNB_IPv6_CHECK_SITE
   fi
@@ -580,13 +809,13 @@ function checkDependencies() {
   for i in curl dig; do
     if ! command -v $i >/dev/null 2>&1; then
       errorMessage "could not find \"$i\", DynB depends on it. "
-      ((failCounter++))
+      (( failCounter++ ))
     fi
   done
-  [[ -x $(command -v jq 2>/dev/null) ]] || {
+  [[ -x $(command -v jq 2> /dev/null) ]] || {
     if [[ $DYNB_UPDATE_METHOD != dyndns* ]]; then
       echo "This script depends on jq and it is not available." >&2
-      ((failCounter++))
+      (( failCounter++ ))
     fi
   }
   if [[ failCounter -gt 0 ]]; then
@@ -647,11 +876,11 @@ function doDynDNS2Updates() {
   changed=0
   if [[ $_is_IPv4_enabled == true ]]; then
     ipHasChanged 4
-    ((changed += $?))
+    (( changed += $? ))
   fi
   if [[ $_is_IPv6_enabled == true ]]; then
     ipHasChanged 6
-    ((changed += $?))
+    (( changed += $? ))
   fi
   if [[ $changed -gt 0 ]]; then
     if checkStatus; then
@@ -660,7 +889,7 @@ function doDynDNS2Updates() {
         debugMessage "DynDNS2 update success"
       else
         debugMessage "Save new status after dynupdate has failed"
-        setStatus "$_response" "$(date +%s)" $((_errorCounter += 1)) "$DYNB_DYN_DOMAIN" "${DYNB_USERNAME}" "${DYNB_PASSWORD}${DYNB_TOKEN}"
+        setStatus "$_response" "$(date +%s)" $(( _errorCounter += 1 )) "$DYNB_DYN_DOMAIN" "${DYNB_USERNAME}" "${DYNB_PASSWORD}${DYNB_TOKEN}"
       fi
     else
       debugMessage "Skip DynDNS2 update, checkStatus fetched previous error."
@@ -684,8 +913,8 @@ function doUpdates() {
 ## MAIN method ##
 #################
 function dynb() {
-  # shellcheck disable=SC1091,SC1090
-  source "$(dirname "$(realpath "$0")")/dynb-parsing.sh"
+  ## parameters and checks
+  checkDependencies
 
   # shellcheck source=.env
   if test -f "$_configFile"; then
@@ -704,12 +933,11 @@ function dynb() {
     source "$_statusFile"
   fi
 
-  ## parameters and checks
   handleParameters
-  checkDependencies
 
   if loopMode; then
-    while :; do
+    while :
+    do
       doUpdates
       sleep $DYNB_INTERVAL
     done
@@ -724,7 +952,7 @@ function dynb() {
 ## END MAIN section ##
 ######################
 
-dynb "${@}"
-exit $?
+  dynb "${@}"
+  exit $?
 
 # ] <-- needed because of Argbash